RAREELECTRICAL New Delco Type Single 1 One Wire Self Energizing Se Alternator Compatible With 12 Volt 63 Amp

RAREELECTRICAL Brand Compatible With DELCO, GM, MANALTERNATOR DELCO 10SIVOLTAGE: 12 VOLTSAMPERAGE: 63 AMPSREGULATOR POSITION: 3: 00POLARITY: NEGATIVEALTERNATOR FAMILY TYPE: 100OUTPUT STUD DIMENSIONS: 12-24NEWWEIGHT: 11.445 LBS. / 5.20 KGPLEASE VERIFY YOUR OEM PART NUMBER FROM YOUR ORIGINAL UNIT TO HELP ENSURE FITMENT.BRAND NEW 63 AMP 1-WIRE ALTERNATOR.THIS IS ONE OF THE FINEST AND MOST EFFICIENT GM ALTERNATORS ON THE MARKET TODAY. THE INSTALLATION IS VERY STRAIGHTFORWARD AND SIMILAR TO THE ORIGINAL UNIT YOU ARE REPLACING. WIRING IS SIMPLE BECAUSE OF THE SELF-EXCITING REGULATOR THAT USES ONLY A 1-WIRE BATTERY HOOKUP OR YOU CAN USE THE 2-PRONG PLUG-IN CONNECTION AND BATTERY CONNECTOR.SIMPLY DISCONNECT YOUR NEGATIVE BATTERY CONNECTION AND THE WIRES GOING TO YOUR OLD ALTERNATOR. NEXT REMOVE THE OLD ALTERNATOR. INSTALL THE NEW 1-WIRE ALTERNATOR, RECONNECT THE HEAVY BATTERY OUTPUT WIRE GOING TO THE ALTERNATOR OUTPUT CONNECTION, TIGHTEN THE BELT, BE SURE THE OLD UNUSED PLUG-IN CONNECTOR IS TAPED UP AND OUT OF THE WAY. RE-CONNECT YOUR NEGATIVE BATTERY CABLE AND YOUR DONE. ALTERNATOR OUTPUT WILL VARY FROM 14.3 TO 14.9 VOLTS DEPENDING ON BATTERY CONDITION AND ACCESSORY LOAD.MANUFACTURED WITH 100% NEW COMPONENTSHIGH TEMP WINDINGSEXCLUSIVE OE EQUIVALENT RECTIFIER AND REGULATORORIGINAL OE FINISHEASY 1-WIRE HOOKUPTHIS NEW UNIT IS A DIRECT BOLT-IN REPLACEMENT TO ANY GM ALTERNATOR FROM 1965-1986. WORKS GREAT FOR MUSCLE CARS OR STREET RODS.

• Compatible with DELCO, GM, MAN. Please verify your OEM part number from your original unit to help ensure fitment.
• Replaces: Alternator Delco 10Si / Voltage: 12 Volts / Amperage: 63 Amps / Regulator Position: 3: 00 / Polarity: Negative / Alternator Family Type: 100 / Output Stud Dimensions: 12-24 / New / Weight: 11.445 Lbs. / 5.20 Kg
• Applications: Please Verify Your Oem Part Number From Your Original Unit To Help Ensure Fitment. / Brand New 63 Amp 1-Wire Alternator. / This Is One Of The Finest And Most Efficient Gm Alternators On The Market Today. The Installation Is Very Straightforward And Similar To The Original Unit You Are Replacing. Wiring Is Simple Because Of The Self-Exciting Regulator That Uses Only A 1-Wire Battery Hookup Or You Can Use The 2-Prong Plug-In Connection And Battery Connector. / Simply Disconnect
• Applications: Negative Battery Connection And The Wires Going To Your Old Alternator. Next Remove The Old Alternator. Install The New 1-Wire Alternator, Reconnect The Heavy Battery Output Wire Going To The Alternator Output Connection, Tighten The Belt, Be Sure The Old Unused Plug-In Connector Is Taped Up And Out Of The Way. Re-Connect Your Negative Battery Cable And Your Done. Alternator Output Will Vary From 14.3 To 14.9 Volts Depending On Battery Condition And Accessory Load. / Manufactured
• Alternator - Voltage: 12V Amperage: 63 Amps Country Of Origin: CN Source: Aftermarket