STEPPERONLINE Nema 23 CNC Stepper Motor 2.8A 175.6oz.in/1.24Nm CNC Stepping Motor DIY CNC Mill

This bipolar Nema 23 stepper motor with 1.8 deg. step angle (200 steps/revolution). Each phase draws 2.8A, allowing for a holding torque of 1.24Nm(175.6oz.in). Electrical Specification: * Manufacturer Part Number: 23HS22-2804S * Motor Type: Bipolar Stepper * Step Angle: 1.8 deg. * Holding Torque: 1.24Nm(175.6oz.in) * Rated Current/phase: 2.8A * Phase Resistance: 0.9ohms * Inductance: 2.5mH+/-20%(1KHz) Physical Specification: * Frame Size: 57 x 57mm * Body Length: 56mm * Shaft Diameter: 6.35mm * Shaft Length: 21mm * Number of Leads: 4 * Lead Length: 500mm * Weight: 700g Connection: Black(A+), Green(A-), Red(B+), Blue(B-) Warning: Make sure the motor connect to a constant current or chopper drive controller before you test motor. Connecting the motor directly to a power supply will destroy the motor.

• Higher Torque
• 1.24Nm(175.6oz.in) holding torque
• NEMA 23 bipolar 2.24"x2.24"x2.2" 4-wire
• 1.8 deg. step angle(200 steps/rev)
• Rated current 2.8A & resistance 0.9ohms